High concentrate gear?
- Thread starter Champ14
- Start date
EQ can usually be a little more concentrated and hold better than other compounds, but I still don't really like it at a concentration of more than 300. 400 is too high in my opinion
yes, it is very possible... eq is one that can be butter smooth at a higher concentration... AY used to make a VERY high concentration and it was some of the best I have ever used... robolics 300 is excellent for smoothness as well...
Thanks for the compliment Dylan.
Op, as mentioned eq can be pretty high. It's part of the finer points of brewing that comes with experience. That's what makes it not pip your ass onto the floor.
Robolics Representative. PM for details.
C
cbbram00
Guest
Eq is the exception to this rule. I've seen it as high as 600 with no PIP. Eq is very smooth... It's usually mixed with other gear to make injections painless.
as you can see, eq is the one compound you can get a pretty damn high concentration level with and it can still be very smooth...
C
cbbram00
Guest
Deca around 300
Tren is usually 75 - 150
Test it depends on the ester
Usually the lower the concentration you'll experience less PIP.
in terms of dosing or concentration?
Enanthate esters are typically more concentrated than propionate esters. The shorter esters are usually 100mg per ml, and the longer the Ester the more concentrated it can be typically. That's why you can see EQ dosed so high per ml, and Deca at 300mg per ml, etc...
yes, short esters are going to generally be 100 mg/ml... you wont likely see them any higher than that... sust comes in 4 and even 500 but i would NOT recommend that at all... you likely wont see primo any higher than 200... ive seen deca 300 but it will generally be 200... same with tren... generally test will be 200 but sometimes 250... it just depends on who is making it man.. there is no way to properly answer that because there are so many options... GENERALLY the dosing i gave you will be accurate but its not 100% at all...
Similar threads
