Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Are you new to quads or pinning in General?Does it ever get less painful!!? Who’s got some much welcome advice while I enjoy this wheelchair...
Sent from my iPhone using Tapatalk
do not pin too fast man... you need to do it slow and very smooth.. its not a race and thats how you wind up with pip or worse
you could harpoon a fucking whale with that LOLA friend of mine pounds his with an 18g and just slams it in. Says he doesn’t have time for a slow pin [emoji23]
you could harpoon a fucking whale with that LOL
Run the oil under warm water for a little bit.
Find the sweet spot on your quad.
Keep a steady hand...stirring the needle will cause discomfort for a few days.
Inject slowly.
Massage area after.
Good to go!
Sent from my SM-G935T using Tapatalk
do not pin too fast man... you need to do it slow and very smooth.. its not a race and thats how you wind up with pip or worse
I usually use a 23 gauge 1 inch but recently got these 26 gauge spears, the 23s are pretty brutal so I’ll likely get some shorter 26s in the near future... pinning where I should in the quad as RickRock mentioned above, never tried my delts and was curious about that as well.. 1/2 inch or what?Go for 1” man. I use that everywhere except delta I have to use a shorter one.
Also what part of the quad are you pinning?
I usually use a 23 gauge 1 inch but recently got these 26 gauge spears, the 23s are pretty brutal so I’ll likely get some shorter 26s in the near future... pinning where I should in the quad as RickRock mentioned above, never tried my delts and was curious about that as well.. 1/2 inch or what?
Sent from my iPhone using Tapatalk
Fuck that. If that idiot wants to deal with that more power to him. He sounds like a glutton for punishment. I'll never understand why anybody can't give a damn minute for an injection. Makes no sense to meA friend of mine pounds his with an 18g and just slams it in. Says he doesn’t have time for a slow pin [emoji23]
Yea 1/2 is plenty for my delts. Not much fat but I have lagging delts so that’s plenty lol
One thing you can do to “shorten” your 1 1/2” so you can still use them is cut the cap at 1” and that way when you pin, the cap stops you. Only bad thing is afterwards you can’t cap, so have a hard container to store them after