Needle length for quads

[tower34]

What is the best length for pinning quads. I’ve been using a one inch butt was wondering if a shorter will do since it’s such a lean area.


Sent from my iPhone using Tapatalk Pro

 

[LongDuckDong]

Shorter? I was going to say longer. I use 1 1/2

Sent from my SM-N920V using Tapatalk

 

[cbbram00]

I use 25g 5/8 inch for TRT and 23g 1 inch on cycle. When I'm on cycle there's more oil volume so I want it to go deeper but for TRT 25g 5/8 does the job if you're lean (except for glutes).

 

[Jswole79]

You could probably go as small as 5/8" if you're pretty lean. I use 5/8 for delts and 1" for quads. Sometimes feels too deep. A lot of factors. 1" is probably safest there.

 

[tower34]

Thanks guys.


Sent from my iPhone using Tapatalk Pro

 

[LongDuckDong]

Thats what she said

Sent from my SM-N920V using Tapatalk

 

[Hunter0121]

I do quads for my trt with 1in 25g or 23g. 23g goes in quicker with a poke here and there but 25g is virtually painless but a good 45 seconds to get your gear injected. If you are not a fan of needles in ya for what seems long try the 23g

Sent from my SM-G965U using Tapatalk

 

[LongDuckDong]

I do quads for my trt with 1in 25g or 23g. 23g goes in quicker with a poke here and there but 25g is virtually painless but a good 45 seconds to get your gear injected. If you are not a fan of needles in ya for what seems long try the 23g

Sent from my SM-G965U using Tapatalk

Yup. 23g for quads and glutes but the harpoon length

Sent from my SM-N920V using Tapatalk

 

[DylanGemelli]

yeah, 5/8 is the lowest you should go

 

[tower34]

I do quads for my trt with 1in 25g or 23g. 23g goes in quicker with a poke here and there but 25g is virtually painless but a good 45 seconds to get your gear injected. If you are not a fan of needles in ya for what seems long try the 23g

Sent from my SM-G965U using Tapatalk

Ya I use a 25 gauge as well and I can hardly feel a thing.


Sent from my iPhone using Tapatalk Pro

 

[Cyclops]

1 1/4 for me, depends on your muscle size and how much you are injecting also