Mixing a pen with primo and test?

[ErTetris]

What do you think about mixing a syringe with test and primo? Has anyone done it? Could this reduce primo pip?

It sounds crazy, but I'm curious to ask.

My primo gives high pip when dosing more than .5 cc. Thus to reach 1cc per day I have to split the dose into 2 injections of .5 . Primobolan is the common vial concentration of 100mg/ml.

Also, if primo pip hurts, does it mean is good? Or the pip isn't related to quality. I got to try two different brands, one Solano labs, the other Roid+. They look legit, but it's hard to tell unless tested for long enough. My sources and researches made me believe they are trustworthy.

Sent from my RoidPhone using Tapatalk

 

[TX TERROR]

Uhhhh.... yes it can be done. Thats quite common.

I've mixed all kinds of shit in a syringe.

Sent from my SM-N910T using Tapatalk

 

[cmb5017]

Mix it shoot it repeat

 

[MarkD]

i personally mix everything depending on what and where I am pinning it. If you get crazy pip like that, mixing it with the same amount of test oil wise and hit a bigger muscle group. EQ would be another good on to mix with. it's what I use to take the bite off things most of the time.

 

[ErTetris]

Uhhhh.... yes it can be done. Thats quite common.

I've mixed all kinds of shit in a syringe.

Sent from my SM-N910T using Tapatalk

I mix all my shit..

Mix it shoot it repeat

i personally mix everything depending on what and where I am pinning it. If you get crazy pip like that, mixing it with the same amount of test oil wise and hit a bigger muscle group. EQ would be another good on to mix with. it's what I use to take the bite off things most of the time.

Awesome, good to know I'm going to mix it for my first time, let's see how it goes. I thought that my question about mixing was weird. Thanks for the info!

 

[ErTetris]

Pip isn't associated with high quality.. But primo can have little bite

Primo does pip much higher than test. What makes primo PIP harder than test? Is it the oil or the primo chemical composition? Enlighten me gurus!

Sent from my RoidPhone using Tapatalk

 

[mastermolnar]

Id say the ester attached and the quality of filtration/suspension. Obviously the concentration of mg/ml will play a large role but for me ive found that pip generally comes from poor injection technique.

 

[ErTetris]

Id say the ester attached and the quality of filtration/suspension. Obviously the concentration of mg/ml will play a large role but for me ive found that pip generally comes from poor injection technique.

I have no PIP with test injecting .5 cc = 100mg, but I feel moderate PIP injecting primo .5cc=50mg. I have heard several times that primo is painful, but there is a huge difference between 2 different brands with same mg/ml concentration. It could be, as you said the ester and the filtration/suspension. Since test doesn't hurt, I assume my injection technique is good. However good point. I'll go back reading more about PIP and see if I'm doing something wrong.

Sent from my RoidPhone using Tapatalk

 

[DylanGemelli]

generally with primo, the higher the concentration, which should not exceed 200 mg/ml, the more the PIP... primo is always associated with having some of the most painful injections of anything but that depends on the quality or what is used for oil as well... i can tell you from experience... NO PIP whatsoever with the the following brands of primo I have used... AY, Biotech, Robolics and Pharma Lady... AY and Pharma Lady have it 100 mg/ml and biotech and robolics have it at 200 mg/ml... you can mix however you want... i generally take 5 cc injections in the delt with 2-3 cc's primo and its just fine bro...

 

[TX TERROR]

What primo do you have? Enanthate or ace?

Sent from my SM-N910T using Tapatalk

 

[hurricane]

What do you think about mixing a syringe with test and primo? Has anyone done it? Could this reduce primo pip?

It sounds crazy, but I'm curious to ask.

My primo gives high pip when dosing more than .5 cc. Thus to reach 1cc per day I have to split the dose into 2 injections of .5 . Primobolan is the common vial concentration of 100mg/ml.

Also, if primo pip hurts, does it mean is good? Or the pip isn't related to quality. I got to try two different brands, one Solano labs, the other Roid+. They look legit, but it's hard to tell unless tested for long enough. My sources and researches made me believe they are trustworthy.

Sent from my RoidPhone using Tapatalk

yes brother. its the prefered way. why would you want to do the shots seperate? do you enjoy pinning ? lol

 

[RickRock]

You can always mix oils. Most of us do that every time. As far as reducing pip, it can reduce it to some extent by mixing primo with something that has a lot more room in its carrier like equipoise. Certain testosterones can help too depending on ester and concentration.

Main thing is find a good source for your gear, and pip should be a very minor concern, even with primo