syringe

[RickRock]

Where can i buy syringes and needles for injecting follistatin? i am new to needles. if any1 has any info or input...tips tricks hacks or anything like that... i would really appreciate it.

I get all of mine from www.gpzservices.com

You can get whatever gauge and length of needle you'd like.

 

[cmb5017]

I use gpz as well. I really like the nipro brand. Very fast shipping and good prices

 

[cmb5017]

Gauge is how big it is. The bigger the number the smaller the needle. 18g =big. 25 =small
u need 25g x 1 inch unless ur injecting glute in which case u want one and a half inch

 

[RickRock]

what does gauge mean exactly and what lengths are recommended? will a thinner needle be less painfull? how many inches do i have to penetrate the skin? is 1 inch enough?

The bugger number on gauge indicates a smaller needle. Length depends on where you are injecting. 1" length works for a lot of areas, but for glutes I would go 1.5". As for gauge, I find 25g the best to inject with. I draw with a 22g, then switch to 25g to Inject

 

[EZ_E]

Hang on, before we talk about syringes, why are you taking follistatin?

 

[RickRock]

Re: RE: Re: syringe

ima try it out. i found one with the tag removed on this website...

http://www.transformixpeptides.com/products/follistatin

my question is.. can i draw and inject with the same needle lets say 25g? can i inject into glutes with 3/4 inch needle?

You never want to draw and inject witj the same needle. It dulls the needle causing more PIP, and also opens up the possibility of infection greatly. Why take the risk for a few bucks worth of needles?

 

[DylanGemelli]

will 3/4 inch length of the needle be fine for injecting into the buttox

even a 1 inch injection in the glute is possibly too small... 3/4 is not going to do well whatsoever for you in the glute... i would not even consider it

 

[cmb5017]

ima try it out. i found one with the tag removed on this website...

http://www.transformixpeptides.com/products/follistatin

my question is.. can i draw and inject with the same needle lets say 25g? can i inject into glutes with 3/4 inch needle?

No draw with a larger pin like 18g and glutes need 1 1/2 inch needle minimum

 

[BigBusiness]

so 1.5 inch .... and stick it in most of the way? or all the way?

All the way in!!!

 

[DylanGemelli]

so 1.5 inch .... and stick it in most of the way? or all the way?

most of the way? you never just go most of the way brother...

 

[cmb5017]

1.5 seems like its too big to go all the way in... well anyways il give it a try and see.

Its a large area of skin and fat before u even touch the muscle. .in reality yoyr probably getting less than an inch worth in the muscle from that injection

 

[RickRock]

1.5 seems like its too big to go all the way in... well anyways il give it a try and see.

Glutes are several inches thick, and you need the longer needle to get deep enough. Always bury the needle in there. I use a 1.5" for both glutes and quads

 

[DylanGemelli]

1.5 seems like its too big to go all the way in... well anyways il give it a try and see.

Glutes are several inches thick, and you need the longer needle to get deep enough. Always bury the needle in there. I use a 1.5" for both glutes and quads

i agree you definitely want 1.5 with the glutes... 1 inch if your extremely lean but you want to be sure its getting completely in the muscle so why even chance it...

I always used a 1" in the quads with no problem but i simply hate quad injections with a passion so i just go 1" in the delts and that is perfect... sites dictate the needle...

 

[Saiyan]

can i inject into shoulders? what length ?

5/8 in is all you need for delts. I have yet to try them yet. But will within the next week or so.

 

[RickRock]

can i inject into shoulders? what length ?

5/8" or 1" will work for delts

 

[DylanGemelli]

can i inject into shoulders? what length ?

i would definitely go with 25 gauge 1 " for your delts